Echo/Echo Dot - DG40s - How to pair and connect?


Make sure that your Echo/ Echo Dot were connected to a Wi-Fi network, please refer to the below link to setup your Echo/ Echo Dot.

Step1: Go to from Safari, Chrome, Firefox, Microsoft Edge, or Internet Explorer (10 or higher) on your Wi-Fi enabled computer, then select Settings and click your Echo/ Echo Dot’s name.

Step2: Click Bluetooth.

Step3: Click‘Pair a new Device’.

Use Bluesoleil:

Step 4: Fine Bluetooth icon and open ‘Display classic View’ , then your Echo/ Echo Dot should be appear as a new icon.

Step5: Double click the Echo/ Echo Dot’s icon to search device, a number of available services should appear in the bottom left hand corner.

Step6: Right click the Echo/ Echo Dot’s icon and select ‘Listen to music’, it will have a voice prompt once connected successfully.

Plug & Play

Step 4: Go to the settings on your PC, turn on Bluetooth.

Step5: Click ‘Add Bluetooth or other device’.

Step6: Click your Echo/ Echo Dot’s icon.

Noticed: Your PC’s name will shows on the setting page if your Echo/ Echo Dot connected successfully with the Bluetooth Dongle.

Have more questions? Submit a request