Jogger Plus - Document - PDF User Manual (English)



1. Product overview

(1). Speaker
(2). Next
(3). LED indicator
(4). Previous
(5). Headband
(6). USB charging socket
(7). Multi-function button(MFB)
(8). Microphone
(9). Volume down
(10). Volume up
(11). Sweat-proof cap
(12). NFC

What’s in the box -

Avantree Jogger Plus
Micro USB charging cable
Silicone earbuds
Carrying pouch
User manual


2. Working with mobile phone

It is important to pair the headset with your Bluetooth enabled mobile phone for first time use.

2.1 Pairing procedure:

Step 1: Ensure the headset is off.
Step 2: Press and hold the MFB button (about 7-10 seconds) until the LED blinks blue and red alternately.
Step 3: Active Bluetooth on your phone and select “Avantree Jogger Plus”

Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset on again, provided your phone is within range.


2.2 Connect with NFC enabled mobile phone

Step 1: Make sure NFC function is turned on from your phone and that the screen is active and unlocked.
Step 2:Hold the NFC mobile phone against the NFC zone of the headset (the NFC logo)



Since NFC antenna is located in different position of phone. It is helpful to know the position for last paring. For details on NFC, see your phone’s user manual.


3. Working with two mobile phones simultaneously

Step 1:Connect headset with the first phone as above. Then turn off the headset.
Step 2: Connect headset with the second phone as above.
Step 3: Tap and select "Avantree Jogger Plus" on the first phone to connect it.

Step 4: Now the headset has connected with the two phones simultaneously. 




4.How to use

Basic Operations

Button Function     Operation    


On / Off                                                Press and hold MFB 4s
Answer a call                           Press MFB once 
End a call                            Press MFB once
Reject a call                       Press and hold MFB 3s
Redial last number                          Double click MFB
Play / Pause music                          Press MFB once
V+ and V- Voice Dial (phone feature, such as siri)     Short press both “V+” and “V-”
Next Mute / Unmute the microphone      Press and hold “Next” until a short beep
V+ Volume up                           Press and hold “V+”
V- Volume down                            Press and hold “V-”
Next Next track                            Press “Next” once
Previous Previous track                           Press “Previous” once

Advanced Operations

Button      Function   Operation  


Switch a call from Headset to Mobile Phone         Press and hold MFB 2s
Switch a call from Mobile Phone to Headset         Press and hold MFB 2s
Answer a second call and end the first simultaneously   Press MFB once

Answer a second call and hold the first          Press and hold ”V+” 2s
Switch between 2 phone calls                               Press and hold “V+” 2s 
Previous  Reject a second call                                                     Press “Previous” once  


5.Working with a PC or Laptop

5.1Pairing procedure:

Step1: Turn Jogger Plus off (press and hold MFB button for 4s)
Step2: Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
Step3: Active Bluetooth on your PC/notebook and select “Avantree Jogger Plus”.



Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you may need a Bluetooth audio adapter to add the feature on PC / notebook that do not. For details on how to set up with PC / notebook, please see

6.How to charge

When battery power is low, the LED indicator will flash red once every 10 seconds and a beep sound will come up every one minute. Please charge your headphone. Please remove the micro-USB protector and charge the headphones via the supplied USB to AC adapter or PC USB port. It normally takes about 2.5 hours to fully charge the battery. The LED will indicate red when charging and will turn off when charging is complete.



7. How to reset

You may need to reset Jogger Plus if it is not working as expected. In standby mode (just turn it on), press and hold “Next” button for 8 seconds until the indicator flashes blue and red. The headphone has now been reset to its original settings. After being powered on again, it will enter pairing mode automatically.

8. Product Specification

● Bluetooth V4.1 with EDR
● Support profiles: Headset, Handsfree, A2DP, AVRCP
● Operational range: Class 2, 10 meters
● Battery: 140mAh rechargeable lithium battery
● Talk time: up to 9 hrs
● Music time: up to 8 hrs
● Standby time: up to 200 hrs
● Headset weight: 23g
● Headset size: 85mm(L)x72mm(W)X25.5mm(H)

The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependant on different usage styles, settings and operating environment.

For more FAQ information, please refer to

Dispose of the packaging and
this product in accordance with
the latest provisions.
QDID: B015071
IC ID: 8475A-AS6







Have more questions? Submit a request