Please note: there are two versions of this item, version 1 doesn't have a microphone, version 2 has a microphone.
1. Product Overview
1) LED indicator
Apico without Microphone
Apico with Mic
|2) Multi-function button (MFB)|
|3) Charging socket|
2. What's in box?
A. Avantree Apico Earbud
B. USB charging cable
C. Silicone ear buds
D. Carry case
E. User Quick Guide
3. Pairing / Connecting
Step 1 Ensure the earbud is turned off.
Step 2 Press and hold the MFB for about 3-5 seconds until the LED flashes BLUE and RED alternately.
Step 3 Activate Bluetooth on your phone and search for new devices.
Step 4 Select "Avantree Apico" to pair and connect.
Step 5 Once paired and connected, you should hear "Pairing Completed".
A. Once paired and connected, the earbud will automatically connect to your phone whenever you turn the earbud on again, provided it's within range.
B. The earbud will automatically switch itself off if it's disconnected for over 5 minutes.
4. Multi-point - Connect with two phones simultaneously
Step 1 Pair and connect earbud with the first phone as above. Then turn earbud off.
Step 2 Enter pairing mode again - from off status, press and hold the MFB for about 3-5 seconds until the LED flashes BLUE and RED alternately.
Step 3 Pair and connect earbud with the second phone as above.
Step 4 Connect with the first phone manually - select the "Avantree Apico" from the paired device list.
Note: Once paired and connected, the earbud will automatically connect the last paired device first and you will need to manually connect with the other device.
5. Basic Functions
|MFB||Power on||Press and hold the MFB for about 2 seconds until the Blue LED flashes 3 times|
|Power off||Press and hold the MFB for about 3 seconds until the RED LED stay on 1 second|
|Enter pairing mode||Press and hold the MFB 3-5 seconds until the LED blinks alternatively BLUE and RED|
|Answer / End a call (only works for Version 2)||Press MFB once when a call is incoming or in progress|
|Reject a call (only work for Version 2)||Press and hold MFB for 1 second when a call is incoming and you will heard a tone and voice prompt "call rejected"|
Last number redial (only work with Version 2)
|Double click MFB|
|Music play||Press MFB once|
|Music stop||Press MFB once when playing music|
6. LED Indicator
|LED Indicator||Apico Status|
|Blue LED flash 3 times||Power on|
|Red LED on 1 second||Power off|
|The Red and Blue LED flash alternate||Pairing in progress|
|Red LED flash twice||Low Battery|
|Red LED steady on||Charging in progress|
|Red LED off||Charging completed|
7. How do I reset the Apico?
Step 1 Make sure the earbud is OFF.
Step 2 Press and hold MFB for about 10 seconds until the RED LED turns off.
8. How to charge?
When the battery power is low, the LED will flash red twice and you'll hear the "Battery Low" voice prompt every 20 seconds. Please charge the earbud via the supplied USB to AC adapter or PC USB port. It normally takes about 2 hours to fully charge. The LED will stay red while charging then turn off when charging is complete.
9. Product Specification
. Bluetooth compliance: Bluetooth 4.1
. Support profiles: HSP and A2DP profile
. Stand-by time: 80 hours
. Music time: up to 3 hours
. Battery charging time: about 2 hours
. Battery type: rechargeable lithium battery
. Dimensions: 23 x 20 x 23mm
. Input: 5V, 500mA
. Weight: 3.8g
Note: The music time and standby time may vary when used with different mobile phones or other Bluetooth devices, usage settings, usage styles, music formats and environments.