Keywords: 10BS, Reset, Clear pairing history, Reboot
You may need to reset 10BS if it is not working as expected. When it is reset to factory default settings, all the paired mobile phones information will be erased.
STEP 1 Make sure the 10BS is on. And your phone is disconnected from our 10BS.
STEP 2 Press and hold both V+ and V- for about 10 seconds until the LED flashes blue and red, then release the buttons.
STEP 3 Power off 10BS. After being powered on again, it will enter pairing mode automatically.
NOTE: For successful connection, please also delete the paired information from your phone and re-pair with 10BS.
Comments