Ego - User Manual


   2. Basic Operation

Button Function Operation
MFB Power on / off Hold the MFB for about 4s to turn on / off
Enter pairing mode From off state, press and hold the MFB for 4s until the LED indicator flashes BLUE and RED alternately
Answer / End a call Press once
Reject a call Press and hold for 2s
Last Number Redial Double click
Play / Pause Press once
V+ Volume up Press once
Next track Hold for 2s
V- Volume down Press once
Previous track Hold for 2s
V+ & V- Voice dialing
(phone feature)
Press V+ and V- together once
Clear pairing history On the standby mode, hold V+ and V- together for 7s, the LED flashes BLUE and RED together and then will power off

    4. Installation

   5. Pairing and connecting (call & music)

a. In pairing mode, if pairing procedure is not completed within 2 minutes, the headset will automatically turn off.
b. For first time use, the headset will automatically enter the pairing mode.
c. Once disconnected for over 20 minutes, the headset will automatically turn off.

5.1 Answer a call
For better call quality, please:
Step 1 Wear the head set
Step 2 Press the MFB to answer incoming call

5.2 Stream music to car stereo
Step 1 Make sure the headset is connected to your phone.
Step 2 Make sure car stereo is on and set input source to AUX. Now you can stream the music from your phone to your car speakers via your stereo

   6. Multipoint – Connect with two phones simultaneously

Step 1 Pair and connect headset with the first phone as above. Then turn off the Bluetooth on the first phone.
Step 2 Turn off the headset - press and hold the MFB for 4 seconds.

Step 3 Activate the headset’s pairing mode again - press and hold the MFB for 4 seconds until LED blinks BLUE and RED alternately.
Step 4 Activate Bluetooth on the second phone and set it to search for new devices.
Step 5 Select “Avantree Ego” to pair and connect.
Step 6 Turn on the Bluetooth of the first phone.
Step 7 Turn the headset off and on again, it will automatically search and connect with the last two paired phones.

   7. Clear pairing history

Step 1 Ensure the headset is in STANDBY mode.
Step 2 Press and hold V+ and V- together for 7 seconds. The LED flashes BLUE and RED together once and then will power off.

   8. How to charge

When the battery is low, the LED will flash red and an audible prompt can be heard every 10 seconds. Please charge the headphone with the charging cable using an adapter or PC USB port. It normally takes about 2 hours to fully charge the battery. The LED will turn red when charging and will turn off when charging is complete.

Note: AC adapter requirement 5V / 500mA-2A.

   9. Product Specification

• Bluetooth compliance: Bluetooth 4.0
• Operation range: Class 2, up to 10 meters
• Supported profiles: HSP, HFP and A2DP profile
• Integrated with echo cancellation.
• Built-in speaker and microphone.
• Stand-by time: 60 hours
• Talk time: 4 hours
• Battery charging Time: about 2 hours
• Charger voltage / current: DC5.0V 300~500mA
• Battery type: 60mAH rechargeable lithium battery
• Weight: 29g

Have more questions? Submit a request