CK11 - Guide - Pair & Connect


Keywords: CK11, Reset, Clear pairing history, Reboot, connect, pairing, pairing mode

Normally on first use when you set the toggle switch to ON, it will automatically enter pairing mode. If not, you may also need to make it into paring mode.

Step 1 Power on CK11 by setting the toggle switch to ON.

Step 2 Press and hold the MFB for 3 seconds until LED indicators flashes BLUE and RED alternately with voice prompts "paring" to enter pairing mode.


Step 3 Activate Bluetooth on your phone; search and select “Avantree CK11” to reconnect.


1. Once paired and connected, the next time it will automatically reconnect to the last connected device.

2. If your phone can't connect successfully (“Avantree CK11” can't appear on the phone or appears but phone fails to connect), please try to make the phone to forget this device, and then switch the phone Bluetooth function OFF and back ON again. Now you should be able to pair.

If still have issue, you can try to reset the car kit:

CK11 - Guide - Reset / Clear pairing history

3. For Android 2.0 below, you may be required a code to connect. Please try to input 0000/8888/1234 in your phone to connect.


Have more questions? Submit a request