ANC032 - Troubleshooting - Can't turn on


Keywords: ANC032,032,short battery life, can't hold charge

There are TWO possibilities 

  1. The headphones have been drained 
  2. Product defective issue  


  1. The headphones have been drained 

If you hear a beep sound once a minute, you should recharge your headphones, Please plug it into a USB wall charger (DC 5V / 0.5-2A) or a powered computer USB port via attached micro USB cable. Normally it will take 2.5hours to fully charged, the LED will remain red when charging and will turn off when charging is complete. 


     2. For the following situations, you can contact directly for RMA support when you recharge your headphones

  • If NO LED lights at all when you try to charge
  • If NO LED lights at all when you press ANC button
  • If NO LED lights at all when you press and hold the power button for 5s

Note: You may not operate properly due to button installation issue. Please long press the very middle of the power button for 3 seconds to power on the headphones (LED blinks BLUE once every 5 seconds after it connected with BT device)


For more info about operations guide - 


If your headphones still not work after the above troubleshooting please feel free to contact with the product order number and LOT number, we'll arrange you a free replacement ASAP. 

Have more questions? Submit a request