Oasis LED indicator as below -
Status | LED indicator | Voice Prompt | Image |
TX - Pairing | "TX" LED flashes GREEN and WHITE alternately | Pairing mode - Please put your device into pairing mode and wait. | ![]() |
RX - Pairing | "RX" LED flashes GREEN and WHITE alternately | Pairing mode - Please put your device into pairing mode and wait. | ![]() |
Single connected | LED A will light up. | Connected. Ready for use. | ![]() |
Dual link Connected | LED A and B will light up. | Connected. Ready for use. | ![]() |
TX reconnected | "TX" LED flashes WHITE | / | ![]() |
RX reconnected | "RX" LED flashes WHITE | Reconnecting to the last paired device. | ![]() |
Bypass(directly cable connection) | Bypass is active when in OFF and TX mode | Power on. Bluetooth transmitter mode with active bypass. | ![]() |
Connected with device using SBC (or APTX or aptX low latency,aptX HD ) codec | SBC(or APTX or LL/HD) will be on | / | ![]() |
Aux cable is not plugged in |
"OPT" LED is on | / | ![]() |
Aux cable is plugged in
|
"AUX" LED is on | / | ![]() |
Pairing with unknown device. Turn off your wanted pairing device. | LED A is still on | / | ![]() |
Comments