Keywords: Audition Procast, AS9PA, use with PC, laptop, computer
-
Set headphones into "Pairing Mode" --
From Power ON , slide the Power Switch to the
position
and hold for 3s until the LED flashes BLUE and RED alternately. (Note: DO NOT slide the power switch from
to
directly)
2. Activate Bluetooth on your PC and connect AS9PA
- For Windows PC >
On the taskbar, select action center > Bluetooth.
If you don't see the Bluetooth icon on the taskbar> select the Start button, then select Settings > Devices > Bluetooth & other devices and turn on Bluetooth. In action center, select Connect > "Avantree AS9PA"
- For OS MAC>
Open System Preferences > Click Bluetooth > Click the “+” sign to add a new device > Select “Headset” as the type of device > Click the Search button > There is a window with the known services of the new headset may appear. The "Avantree AS9PA" headsets will display both the headset and headphone options > Click Continue, and then Finish.
3. Set "Avantree AS9PA" as your PC's default device
Right click the speaker icon in the right bottom corner of the task bar, and select "playback devices" > Select the "Avantree AS9PA" as the "Default Device".
4. For VOIP calls
Please change the mic and speaker settings of your VOIP software
Comments